GWInstek GPP-3650 három csatornás programozható DC tápegység

GWInstek GPP-3650 triple-channel programmable DC power supply

Kurzbeschreibung

GPP-3650 is a triple-channel programmable DC power supply. GPP-3650 supports CH1/CH2: 0 ~ 36V / 0 ~5A output; CH3 supports 1.8V, 2.5V, 3.3V, 5.0V /5A. The augmented model GPP-3650 has the same maximum output power of 385W as that of GPP-3060/6030. GPP-3650 inherit the high program resolution (1mV/0.1mA) and read back resolution (0.1mV/0.1mA) of the GPP series with low-ripple noise characteristics ?1mVrms/?2mArms and ?100µs output transient recovery ability. An independent output on-off switch is provided for each channel.

Eigenschaften

• 4.3”TFT LCD Display
• Setting resolution: 1mV / 0.1mA; read back resolution: 0.1mV / 0.1mA
• Low ripple noise: ?1mVrms/ ?2mArms
• Transient response time: ?100µS
• Load function (CC, CV, CR mode)
• Tracking series and parallel function without additional external wiring
• Utilizing hardware to realize over voltage protection / over current protection / over temperature protection
• Delay function / output monitoring function / output recorder function
• Supports setting value, measurement value and output waveform display
• Sequential output function and built-in 8 template waveforms
• The output recorder function records the output voltage & current parameters with a minimum recording interval of 1 second
• Provides 10 sets of memory for each sequence/delay/recorder/panel setting condition
• Supports a USB (Type A) output terminal
• Intelligent temperature control fan effectively reduces noise
• Standard: RS-232, USB, LAN, Ext I/O ; Optional(manufacturer installed only): GPIB

Paket beinhaltet

• CD (User manual), Quick Start manual, Power cord
• Test Lead: GTL-104A x 3
• European Test Leads: GTL-204A x3, GTL-201A x1

Mentés

Optionen

• USB Cable GTL-246 USB 2.0 A-B type
• RACK GRA-437-E Rack Mount Kit (EIA), 19", 3U Size
• RACK GRA-437-J Rack Mount Kit (JIS), 19", 3U Size
• GPIB (Manufacturer installed only)

Funktionen

• For series and parallel applications of CH1 and CH2, the tracking function can automatically switch to series or parallel output without additional external wiring. Multiple display modes including single channel or multi-channel setting value, measurement value and waveform display to collocate with the built-in output monitoring function allow users to set the monitoring conditions according to their needs to generate an alarm or stop the output during the measurement process to stop the measurement and protect the customer's DUT.